10 Pair Krone Terminal Block

10 Pair Krone Terminal BlockBack MountYH-6089 1 002-02   10 Pair Connection typeYH-6089 1 102-02   10 Pair Disconnection typeProfileYH-6089 1 120-02   10 Pair Connection typeYH-6089 1 121-02   10 Pair Disconnection typeDetails:1.Material: Housing-ABS UL94V-2           base-ABS UL94V-2           Contact -0.5mm thickness           Phosphor bronze plating over nickel over silver2.Cable wire sizes:           Solid copper wires up to 0.4mm-0.8mm in DIA           Insulation PE or PVC insulated wire3.  Wire: AWG 24-26Descriptions:This LSA plus disconnection modules are used throughout the distribution level, in the main distribution frame (MDF), in the cross connection cabinet (CCC) and in the distribution point (DP) boxes. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.It adopts IDC (Insulation Displacement Connection) technique, which means that no soldering, wire-stripping or the use of screws is necessary, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity. The IDC contact is phosphor bronze, with silver plating.They use a normally closed two piece contact, with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test cord can be inserted into a pair to test each side of the circuit independently. This greatly accelerates fault identification.The center contact point can also be used for monitoring or overvoltage protection.Package: 10pcs/bag inner box    250pcs/carton58x27x24cm/carton   14kg/cartonDraw:
10 Pair Krone Terminal Block